Fencing with angled profiles
ALUMINIUM FENCING WITH ANGLED PROFILES
POSTS
Posts in stock (mill finish and RAL 7016 ANTHRACITE):
- SQUARE TUBE EN AW – 6060 50 x 50 x 2 mm
- SQUARE TUBE EN AW – 6060 50 x 50 x 3 mm
- SQUARE TUBE EN AW – 6060 60 x 60 x 2 mm
- SQUARE TUBE EN AW – 6060 60 x 60 x 3 mm
- SQUARE TUBE EN AW – 6060 80 x 80 x 2 mm
- SQUARE TUBE EN AW – 6060 80 x 80 x 3 mm
- SQUARE TUBE EN AW – 6060 80 x 80 x 4 mm
- SQUARE TUBE EN AW – 6060 100 x 100 x 3 mm
- SQUARE TUBE EN AW – 6060 100 x 100 x 4 mm
- FENCING POST WITH CHAMFERED EDGES EN AW – 6060 75 x 75 mm (4 screw holes)
- FENCING POST EN AW – 6060 100 x 100 mm (4 screw holes)
INFILL
Profile in stock (mill finish and RAL 7016 ANTHRACITE):
ALUMINIUM FENCING PROFILE FOR ANGLED SLAT FENCING EN AW-6060 99 x 12 T66 # PS15231
CONNECTING PROFILE
Profile in stock (mill finish and RAL 7016 ANTHRACITE):
ALUMINIUM CONNECTING PROFILE FOR SLAT FENCING WITH ANGLED PROFILES EN AW-6060 42.5 x 25.5 x 16.8, profile length 6 m.
EXAMPLE OF FENCING INSTALLATION WITH ANGLED PROFILES
We offer three options for installing the connecting profile:
1. PROFILE INSTALLED ON THE FRONT OF THE POST
2. PROFILE INSTALLED BEHIND THE POST
3. PROFILE INSTALLED IN THE CENTRE OF THE POST (in this case, 8.7 mm must be cut off the profile)
BASE PLATES
Base plates in stock (RAL 7016 ANTHRACITE):
- ALUMINIUM BASE PLATE FOR FENCING POST – suitable for 50 x 50 mm tube, RAL 7016 – ANTHRACITE FINE TEXTURE
- ALUMINIUM BASE PLATE FOR FENCING POST – suitable for 75 x 75 mm tube, RAL 7016 – ANTHRACITE FINE TEXTURE
- ALUMINIUM BASE PLATE FOR FENCING POST – suitable for 100 x 100 mm tube, RAL 7016 – ANTHRACITE FINE TEXTURE
Example of a base plate that allows for a fully assembled, bolt-together installation. The base plate has holes for bolting the post to the base plate and for fixing the base plate to the ground. The upper base plate is suitable for 50 x 50 mm and 100 x 100 mm posts.
Another example of a base plate suitable for a 75 x 75 mm fencing post with chamfered edges.
POST CAPS
Post caps in stock (RAL 7016 ANTHRACITE):
- ALUMINIUM POST CAP FOR FENCING POST 50 x 50 mm RAL 7016
- ALUMINIUM POST CAP FOR FENCING POST 75 x 75 mm RAL 7016
- ALUMINIUM POST CAP FOR FENCING POST 100 x 100 mm RAL
Example of a post cap suitable for 50 x 50 mm and 100 x 100 mm posts.
Example of a post cap suitable for a 75 x 75 mm post with chamfered edges.
OTHER INDIVIDUAL FENCING COMPONENTS
Profiles in stock (mill finish):
1. EQUAL-LEG ANGLE EN AW-6060 25 x 25 x 2.0 AlMgSi0.5
This profile is suitable for balcony railings made from rectangular tubes, such as 40 x 20 x 1.5 mm, 40 x 20 x 2 mm, etc.
Example of a balcony railing with 40 x 20 x 1.5 mm slats:
2. ALUMINIUM U-PROFILE EN AW-6060 20 x 60 x 20 x 2 AlMgSi0.5
This U-profile serves as a connecting element for driveway and yard fencing with a tear-shaped profile measuring 90 mm in height. Example of a tear-shaped profile:
FASTENERS
Stainless steel pan-head TORX screws according to DIN 7504 are used for installing aluminium fencing, in the following dimensions:
- KNIPING SCREW 4.2 x 19 M DIN 7504 TX20 A2 – suitable for installing aluminium fencing with rectangular tubes 20 mm wide and when the fencing infill is an S-profile.
- KNIPING SCREW 4.8 x 25 M DIN 7504 TX25 A2 – suitable for fencing installations with a Z-profile infill.
Where holes are drilled in the profiles, connecting pieces and posts before assembly, the following screws are used:
- KNIPING SCREW 3.9 x 16 M DIN 7981 TX15 – suitable for fastening angle profiles to the connecting piece.
- SCREW M6 x 10 M ISO 7380-1 A2 ULS – suitable for fastening connecting pieces to posts where holes have been pre-drilled in the posts and connecting pieces and tapped with threads.
For fixing the posts to the base plates and the base plates to the ground, the following are used:
- GALVANISED CONCRETE SCREW 7.5 x 92 – suitable for fastening the base plates to the fencing posts (when using 75 x 75 mm or 100 x 100 mm posts, as these posts already have pre-drilled holes for this type of assembly).
- GALVANISED CONCRETE ANCHORS M8 x 115 – these concrete anchors are used to anchor the posts with base plates to the ground. The base plates already have pre-drilled holes suitable for M8 concrete anchors (this anchoring method can be used with 50 x 50 mm, 75 x 75 mm and 100 x 100 mm fencing posts).
